Cobb Redline Carbon Fiber License Plate Relocation Mount - 2015-2022+ Subaru WRX / 13-22+ Subaru BRZ / Toyota 86 & GR86 / 13-16 Scion FR-S
Cobb Redline Carbon Fiber License Plate Relocation Mount - 2015-2022+ Subaru WRX / 13-22+ Subaru BRZ / Toyota 86 & GR86 / 13-16 Scion FR-S
The COBB Redline Carbon Fiber License Plate Relocation Mount is the premium, no-drill solution for running a front plate without adding holes to your bumper cover or blocking airflow to your cooling stack. It installs using the factory tow hook location and includes a full carbon fiber backing plate with a 2x2 twill weave for maximum adjustability and a clean motorsport look.
Multiple plate orientations let you fine-tune positioning for your specific bumper, front lip, or intercooler setup. High-quality hardware keeps everything locked in place for the long haul, and the system is designed to work alongside performance upgrades, including compatibility with COBB FMIC kits.
Key Features
- No Drilling or Cutting Required: Uses the factory tow hook location for a clean, reversible install.
- Full Carbon Fiber Backing Plate: Premium 2x2 twill carbon weave for a Redline look up front.
- Multiple Mounting Orientations: Adjustable backing plate allows fine positioning and fitment flexibility.
- Preserves Airflow: Off-center placement helps keep the center grille opening and cooling stack unobstructed.
- FMIC Friendly: Compatible with COBB front mount intercooler kits.
- Durable Hardware: High-quality hardware designed to stay secure for the life of the vehicle.
Why We Like It
If your state requires a front plate, this is the cleanest way to stay legal without drilling your bumper. The carbon backing plate adds a subtle Redline detail, and the adjustability makes it easy to work around front aero or intercooler upgrades while keeping airflow where it belongs.
Specifications
- Mounting Location: Factory tow hook receiver
- Backing Plate: Full carbon fiber, 2x2 twill weave pattern
- Adjustment: Multiple backing plate orientations for positioning
- Hardware: Durable, high-quality hardware included
- Intercooler Compatibility: Compatible with COBB FMIC kits
Installation Notes
- Remove the front tow hook cover to access the factory tow hook receiver.
- Thread the mount into the tow hook location and tighten per COBB instructions.
- Select your preferred backing plate orientation and install the license plate.
- Check clearance to the bumper cover, grille, and any front lip/splitter before driving.
- Periodically inspect fasteners, especially after winter driving, track use, or automatic car washes.
What’s in the Box
- (1) COBB Redline license plate relocation mount assembly
- (1) Full carbon fiber backing plate (multi-orientation)
- Required mounting hardware
Compatibility & Disclaimers
Intended for the vehicles listed above using the factory tow hook location. Final positioning can vary depending on bumper design, tow hook depth, and front aero/intercooler configurations. Always confirm the plate does not interfere with sensors, lighting, or airflow, and ensure compliance with local front plate laws.
Original: $228.00
-70%$228.00
$68.40More Images
Cobb Redline Carbon Fiber License Plate Relocation Mount - 2015-2022+ Subaru WRX / 13-22+ Subaru BRZ / Toyota 86 & GR86 / 13-16 Scion FR-S
The COBB Redline Carbon Fiber License Plate Relocation Mount is the premium, no-drill solution for running a front plate without adding holes to your bumper cover or blocking airflow to your cooling stack. It installs using the factory tow hook location and includes a full carbon fiber backing plate with a 2x2 twill weave for maximum adjustability and a clean motorsport look.
Multiple plate orientations let you fine-tune positioning for your specific bumper, front lip, or intercooler setup. High-quality hardware keeps everything locked in place for the long haul, and the system is designed to work alongside performance upgrades, including compatibility with COBB FMIC kits.
Key Features
- No Drilling or Cutting Required: Uses the factory tow hook location for a clean, reversible install.
- Full Carbon Fiber Backing Plate: Premium 2x2 twill carbon weave for a Redline look up front.
- Multiple Mounting Orientations: Adjustable backing plate allows fine positioning and fitment flexibility.
- Preserves Airflow: Off-center placement helps keep the center grille opening and cooling stack unobstructed.
- FMIC Friendly: Compatible with COBB front mount intercooler kits.
- Durable Hardware: High-quality hardware designed to stay secure for the life of the vehicle.
Why We Like It
If your state requires a front plate, this is the cleanest way to stay legal without drilling your bumper. The carbon backing plate adds a subtle Redline detail, and the adjustability makes it easy to work around front aero or intercooler upgrades while keeping airflow where it belongs.
Specifications
- Mounting Location: Factory tow hook receiver
- Backing Plate: Full carbon fiber, 2x2 twill weave pattern
- Adjustment: Multiple backing plate orientations for positioning
- Hardware: Durable, high-quality hardware included
- Intercooler Compatibility: Compatible with COBB FMIC kits
Installation Notes
- Remove the front tow hook cover to access the factory tow hook receiver.
- Thread the mount into the tow hook location and tighten per COBB instructions.
- Select your preferred backing plate orientation and install the license plate.
- Check clearance to the bumper cover, grille, and any front lip/splitter before driving.
- Periodically inspect fasteners, especially after winter driving, track use, or automatic car washes.
What’s in the Box
- (1) COBB Redline license plate relocation mount assembly
- (1) Full carbon fiber backing plate (multi-orientation)
- Required mounting hardware
Compatibility & Disclaimers
Intended for the vehicles listed above using the factory tow hook location. Final positioning can vary depending on bumper design, tow hook depth, and front aero/intercooler configurations. Always confirm the plate does not interfere with sensors, lighting, or airflow, and ensure compliance with local front plate laws.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The COBB Redline Carbon Fiber License Plate Relocation Mount is the premium, no-drill solution for running a front plate without adding holes to your bumper cover or blocking airflow to your cooling stack. It installs using the factory tow hook location and includes a full carbon fiber backing plate with a 2x2 twill weave for maximum adjustability and a clean motorsport look.
Multiple plate orientations let you fine-tune positioning for your specific bumper, front lip, or intercooler setup. High-quality hardware keeps everything locked in place for the long haul, and the system is designed to work alongside performance upgrades, including compatibility with COBB FMIC kits.
Key Features
- No Drilling or Cutting Required: Uses the factory tow hook location for a clean, reversible install.
- Full Carbon Fiber Backing Plate: Premium 2x2 twill carbon weave for a Redline look up front.
- Multiple Mounting Orientations: Adjustable backing plate allows fine positioning and fitment flexibility.
- Preserves Airflow: Off-center placement helps keep the center grille opening and cooling stack unobstructed.
- FMIC Friendly: Compatible with COBB front mount intercooler kits.
- Durable Hardware: High-quality hardware designed to stay secure for the life of the vehicle.
Why We Like It
If your state requires a front plate, this is the cleanest way to stay legal without drilling your bumper. The carbon backing plate adds a subtle Redline detail, and the adjustability makes it easy to work around front aero or intercooler upgrades while keeping airflow where it belongs.
Specifications
- Mounting Location: Factory tow hook receiver
- Backing Plate: Full carbon fiber, 2x2 twill weave pattern
- Adjustment: Multiple backing plate orientations for positioning
- Hardware: Durable, high-quality hardware included
- Intercooler Compatibility: Compatible with COBB FMIC kits
Installation Notes
- Remove the front tow hook cover to access the factory tow hook receiver.
- Thread the mount into the tow hook location and tighten per COBB instructions.
- Select your preferred backing plate orientation and install the license plate.
- Check clearance to the bumper cover, grille, and any front lip/splitter before driving.
- Periodically inspect fasteners, especially after winter driving, track use, or automatic car washes.
What’s in the Box
- (1) COBB Redline license plate relocation mount assembly
- (1) Full carbon fiber backing plate (multi-orientation)
- Required mounting hardware
Compatibility & Disclaimers
Intended for the vehicles listed above using the factory tow hook location. Final positioning can vary depending on bumper design, tow hook depth, and front aero/intercooler configurations. Always confirm the plate does not interfere with sensors, lighting, or airflow, and ensure compliance with local front plate laws.
